Once power is restored, you will now be able to set up the display by following the on-screen prompts.Once the AcuRite logo screen appears, please unplug the display and remove the backup batteries, if applicable, for five minutes to allow the unit to power down completely before restoring power.The display will reset itself and go to the main AcuRite logo screen. It will ask you "Are you sure?", Select "Yes".You will receive a prompt asking if you want to reset to factory settings.
Tap the back arrow in the upper left-hand corner of the display or select Main Menu to return to the main menu.
If the display shows you a picture of the AcuRite Atlas (7-in-1) sensor, Tap "Done" or "Yes" (If the screen does not change when you select Remove a Sensor, skip down to step 7). Select the "Sensor" or "Connections" option from the menu.The "MENU" button is the three white horizontal lines in the upper left-hand corner of the display or the center button with two dots depending on which model of display unit you have. Go to the main menu by tapping the "MENU" button.Remove the batteries from the sensor and change the sensor to a new ABC channel.Bring both the sensor and display unit indoors and position them side by side.Please follow the steps carefully as the order is crucial to the success of the reset. NOTE: It may take approximately 5 minutes for the display unit and sensor to synchronize after batteries are replaced. We do not recommend using heavy-duty or rechargeable batteries. Use standard alkaline batteries (or lithium batteries in the sensor when the temperature is below -4✯/-20✬).Units should be placed at least 3 feet (.9 m) away from electronics that may interfere with wireless communication (such as TVs, microwaves, computers, etc).Under optimal conditions, the units can be located up to 330 ft (100 m) of each other. Relocate the display unit and/or the AcuRite Atlas® (7-in-1) sensor.Batteries can lose 3% of their power or more every year in storage. The battery expiration date should be at least 6 years out. Verify that you are using a fresh set of batteries.You would want to ensure the following first: If your AcuRite Atlas® (7-in-1) High Definition Display is unable to locate your AcuRite Atlas® (7-in-1) Sensor and is displaying the "No Sensor Found" error, when attempting to add a sensor to the display, these steps may also be helpful. The reset below can be used if the outside temperature data is missing, blank, showing dashes, or stuck on the same reading for an extended period of time. If your AcuRite Atlas® (7-in-1) High Definition Display is showing no outdoor temperature reading, dashes, or the outdoor temperature reading is not changing, please perform the troubleshooting steps below.
0 kommentar(er)
